Installing a Brick Paver Walkway or Eco Brick

The use of Installing a Brick Paver Walkway or Refractory Brick Cutting Machine or Pavers to produce a walkway or patio area matches a home in a manner in which is unrivaled. It adds a level of quality and sophistication to a home entryway that can not be accomplished with either concrete or asphalt. Brick and Pavers also can be found in various colors and shapes enabling distinct color schemes and patterns to be attained. In addition, installing a Brick or Paver sidewalk does not always need a pro. With some basic understanding and a relatively basic walkway strategy, a house owner is capable of undertaking such a job.

The secret to setting up a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be set up. In addition, string lines ought to be strung on each side of the pathway.
As soon as the area has been dug down, 3/4" gravel stone must be laid in and tamped down firmly. 2" of sand, or stone dust should be spread out over the gravel. Again the sand/stone dust must be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline must equate to the density of the brick or paver.

Now that you have a stable base, put a 1" pipe or ledger board the length of the walkway on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready area. These strips will act as your sidewalk border and aid to preserve the integrity and shape of the walkway.

When this is done, you can then begin to lay the bricks/pavers. There are lots of patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again help maintain the stability of the pathway.

Undoubtedly bricks/pavers will need to be cut or divided when developing the walkway. Unless you desire to buy or lease an expensive wetsaw, I would recommend acquiring an easy brick/paver splitter. It is basically a chisel with a broad end that is the width of the bricks/pavers. To actually cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you want big grey bricks to break the brick. Then utilizing a hammer strike the butt end of the chisel securely. You might require to do this a number of times. You might likewise wish to flip the brick/paver over and strike the other side of the brick utilizing the hammer and chisle. Within a couple of strikes the brick/paver must break easily. , if your sidewalk has curves you will need to buy/rent a wetsaw.

.

After installing the bricks, construct up the outside edges with additional sand, and then shovel in the topsoil and pack down firmly.
Finally, spread stone dust over the new pathway and sweep into the cracks. Repeat this process a number of times to guarantee the fractures are totally filled. This will finish the interlocking of the bricks and help to eliminate any weed growth. Just add grass seed to the outdoors edges and you must have a stunning entryway to your house within a couple of weeks.


In addition, installing a Brick or Paver sidewalk does not always need a pro. The key to setting up a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipeline or journal board the length of the walkway on either side of the walkway. These strips will act as your walkway border and help to maintain the stability and shape of the pathway. Inevitably bricks/pavers will need to be cut or divided when developing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *